GRUNDFOS SCALA 2 INSTRUCTION FULL

Boosting from wells: Pumps water from a depth of 8 metres.Boosting from tanks: Increases water pressure from roof tanks, break tanks and ground tanks, including rainwater tanks.Boosting from mains: Increases the water pressure delivered by city mains.SCALA2 is the perfect choice for residential buildings with up to 3 floors and 8 taps.We call it intelligent pump control and the result is perfect water pressure. If the pressure drops below the desired level, SCALA2 boosts its operation immediately to compensate for the loss of pressure. SCALA2 features a built-in sensor, which constantly measures the discharge pressure. Size, select and compare pumps and pump systems. Description 7. 1 7.1 Grundfos Eye operating indications 7.2 Fault resetting Pos. 6.3 Fitting the control box cover Example of nameplate Fault finding the product Fig.

: Table Of Contents 0.01 6.2 Fitting the pressure tank Max. Thanks to a water-cooled motor, SCALA2 even offers one of the lowest noise levels of any booster on the market. Find the right pump solution for your installation requirements. GRUNDFOS INSTRUCTIONS SCALA Service instructions. And with its intelligent pump control, SCALA2 automatically adjusts performance to both inlet pressure and water consumption in the home. It packs pump, motor, tank, sensor, drive and non-return valve into one compact unit. The built-in pressure tank reduces the number of starts and stops in case of leakages in the pipe system, causing less wear on the pump.SCALA2 is a fully integrated water booster pump providing perfect water pressure in all taps at all times – even with multiple taps and showers running at the same time.

GRUNDFOS SCALA 2 INSTRUCTION FULL

Max noise level at full load are 53 dB(A) Im pretty sure Scala 2 max input pressure is only supposed to be 35 psi to work properly. 2 smaller pumps with CSV and 2 VFD Grundfos pumps and nothing run better than my current setup which is 1 Grundfos SQE with modded transducer for low pressure. Thanks to its hydraulic design, permanent magnet motor and water cooling, the pump is extremely low-noise, 47 dB(A) in typical use, which makes it suitable for indoor as well as outdoor use. But I dont see that symptom in any of the instructions. The automatic reset function can be deactivated. Restarting will be attempted every 5 minutes 8 times, there after new restart attempt will occur every 24 hours. In case of dry running or similar alarm, the pump will stop. The pump features an automatic reset function. If exposed to dry running, water shortage or excessive temperature, blocked pump, for example in case of seizure or overload, the pump will stop automatically, thus preventing a motor burnout. This facilitates easy installation and start-up of the pump and provides more reliable water supply in installations where there is a risk of dry running and leakages in suction hose or pipes. Provided it is filled with water, the pump is able to lift water from a depth of 8 m in less than 5 minutes. Grundfos SCALA2 has all the components necessary to ensure a comfortable pressure:Īs it is self-priming, the SCALA2 is able to pump water from a level below the pump. Plug the pump into the power outlet and the pump will start. SCALA2 can be installed in three easy steps:ģ. SCALA2 incorporates integrated speed control enabling the keeping of the perfect pressure at the taps, meaning that the pump performance will increase with increasing demand. Grundfos SCALA2 is a fully integrated, self-priming, compact waterworks for pressure boosting in domestic applications.

Grundfos scala 2 instruction